 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 1 of 11 north america only features: models single output model max output power (w) * output voltage range (v) output current (a) input voltage (vac/hz) input voltage (vdc) efficiency (%) amepr60-50120az 60 36-50 1.2 90-305/47-440 120-430 89 amepr60-36170az 59.8 24-36 1.66 90-305/47-440 120-430 88 AMEPR60-24250AZ 60 12-24 2.5 90-305/47-440 120-430 87 amepr60-12500az 60 5-12 5 90-305/47-440 120-430 85 * exceeding the maximum output power w ill permanently damage the converter note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. input specifications parameters conditions typical maximum units inrush current <2ms 115vac 30 a 230vac 50 leakage current 115vac 0.5 ma 230vac 0.7 ac current 115vac 0.73 a 230vac 0.33 power factor 115vac 0.97 230vac 0.93 external fuse 250v/1.5a start up time 250 ms surge voltage 2sec 440 v output specifications parameters conditions typical maximum units current accuracy 3 % line regulation ll-hl 1 % load regulation 0-100% load 3 % ripple & noise * 20mhz bandwidth 75 mv p-p hold-up time 90 ms current adjustment range 100-0 % minimum load voltage see the models table * tested with 0.1f (m/c) or (c/c) and 10f (e/c) parallel capacitors at the end. isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec/3.5ma 3000 vac isolation resistance 500vdc >1000 m ? isolation capacitance 1000 pf ? ac-dc constant current led driver ? over temperature protection ? input range 90-305vac/47-440hz ? waterproof case rated ip68 ? high efficiency up to 89% ? power factor correction ? operating temperature -40 to 85c ? scp, over current protection
series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 2 of 11 north america only general specifications parameters conditions typical maximum units switching frequency 130 khz over current protection 95-110% of iout over voltage protection 110% of vout short circuit protection continuous short circuit restart auto recovery over temperature protection >105c operating temperature with derating over 55c -40 to +85 o c maximum case temperature 100 o c storage temperature -40 to +95 o c temperature coefficient 0.02 % / o c cooling free air convection humidity 95 % rh case material plastic potting epoxy (ip67 rated) wires ul1015 18awg *20cm weight 350 g dimensions (l x h x w) 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm mtbf >400,000 hrs (mil-hdbk-217f at +25c) safety specifications parameters agency approvals culus ce standards ul8750, ul60950-1, en55022, class b, en60529(ip68), en61347-1, en61347-2-13 dimensions 57.68 (2.27) 134.80 (5.30) 40.50 (1.59) 161.30 (6.35) 200.00 (8.00) 200.00 (8.00) 2.30 (0.09) 40.50 (1.59) 60.00 (2.36) 16.75 (0.66) end view top view side view 32.00 (1.26) input/output wires are 18 awg 20cm series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 3 of 11 north america only application circuit model number maximum pot value (k ? ) amepr60-50120az 26.00 amepr60-36170az 16.95 AMEPR60-24250AZ 26.10 amepr60-12500az 34.10 temperature graph -40 -20 020406080 100 100 80 60 40 20 0 free air convection 55 o c safe operating area ambient temperature o c 85 series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 4 of 11 north america only efficiency vs. input voltage & out put current (constant current load) amepr60-50120az amepr60-36170az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 5 of 11 north america only efficiency vs. input voltage & out put current (constant current load) continued AMEPR60-24250AZ amepr60-12500az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 6 of 11 north america only pfc value vs. output load current (constant current mode) amepr60-50120az amepr60-36170az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 7 of 11 north america only pfc value vs. output load current (constant current mode) continued AMEPR60-24250AZ amepr60-12500az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 8 of 11 north america only constant current vs. constant voltage mode amepr60-50120az amepr60-36170az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 9 of 11 north america only constant current vs. constant voltage mode continued AMEPR60-24250AZ amepr60-12500az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 10 of 11 north america only dimming control (output current vs. radj) amepr60-50120az amepr60-36170az series amepr60-az up to 5a | ac-dc led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.j 11 of 11 north america only constant current vs. constant voltage mode continued AMEPR60-24250AZ amepr60-12500az note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. |
Price & Availability of AMEPR60-24250AZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |